Timing Belt Size Calculator

Timing Belt Length Formula:

\[ Pitch\ Length = 2 \times C + \pi \times \frac{D1 + D2}{2} + L \]

Center Distance (C):

Pitch Diameter 1 (D1):

Pitch Diameter 2 (D2):

Correction Factor (L):

Pitch Length:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is Timing Belt Pitch Length?

The timing belt pitch length is the theoretical length of the belt measured along the pitch line. It's a critical parameter for proper belt selection and ensures correct tension and engagement with pulley teeth.

2. How Does the Calculator Work?

The calculator uses the timing belt length formula:

\[ Pitch\ Length = 2 \times C + \pi \times \frac{D1 + D2}{2} + L \]

Where:

\( C \) — Center distance between pulleys (mm)
\( D1 \) — Pitch diameter of first pulley (mm)
\( D2 \) — Pitch diameter of second pulley (mm)
\( L \) — Correction factor (mm)
\( \pi \) — Mathematical constant (3.1416)

Explanation: This formula calculates the theoretical belt length required for proper engagement between two pulleys, accounting for the arc contact and straight sections.

3. Importance of Timing Belt Calculation

Details: Accurate pitch length calculation ensures proper belt tension, prevents slippage, reduces wear, and maintains precise timing in mechanical systems.

4. Using the Calculator

Tips: Enter center distance, both pitch diameters, and correction factor in millimeters. All values must be positive numbers. The correction factor accounts for belt stretch and installation requirements.

5. Frequently Asked Questions (FAQ)

Q1: What is pitch diameter?
A: Pitch diameter is the diameter of the pulley measured at the belt's pitch line, where the belt teeth engage with the pulley grooves.

Q2: How do I determine the correction factor?
A: The correction factor depends on belt material, tension requirements, and installation conditions. Consult manufacturer specifications for specific values.

Q3: Can this calculator be used for different belt types?
A: This formula is primarily for timing belts. Other belt types (V-belts, flat belts) may require different calculation methods.

Q4: What if I have more than two pulleys?
A: For systems with multiple pulleys, the calculation becomes more complex and may require specialized software or manual layout methods.

Q5: How accurate is this calculation?
A: This provides a theoretical length. Actual belt selection should consider standard available sizes and consult manufacturer catalogs for the closest match.